Mindray BS-480 Clinical Analyzer
The BS-480 Automated Analyzer from HORIBA Medical is a fully automated, standalone floor model analyzer that is capable of performing up to 500 tests/ hr. with ISE and 400 tests/ hr. without ISE. It offers many high-end features usually only found in large integrated systems. The Analyzer is equipped with probe collision protection and auto-recovery functions, eliminating operator worry when walking away. Additionally this innovative analyzer can hold up to 90 sample positions and is equipped with intuitive software, making it the ideal solution for Physician Office Laboratories (POL), decentralized laboratories, toxicology laboratories, drug courts, reference laboratories and small hospitals.
Enhanced Reagent Capacity
Reagent carousel can host up to 80 positions and supports “on-the-fly” loading
Increased Productivity
Sample carousel can host up to 90 positions
Quick Access Design
Front loading capability for easy access to ISE pack, wash solution and DI water
Ease-of-Use
Intuitive software with built-in operation commands
Time Saving
Only three minutes of daily maintenance required
1.800.445.9853
Key Markets
- Physician Owned Laboratories (POLs)
- Decentralized laboratories
- Toxicology laboratories
- Drug courts
- Reference laboratories
- Small hospitals
“We have currently changed over from the Olympus AU 400 and the crossover was extremely easy. We really enjoy using the Mindray, super easy and fun to use.”
Enhanced Performance
by running 560 tests/ hr. with ISE and 400 tests/ hr. without ISE
Comprehensive Test Menu
consisting of 23 Drugs of Abuse reagents and over 40 general chemistry reagents
Higher Quality
with a meantime
before failure (MTBF)
of 5.05 years
Cost Savings
with minimum reaction
volume of 120 µL
Longer Walk Away Time
due to 90 sample
and 80 reagent
positions
Greater Reliability
with probe crash protection, liquid level sensing and
bubble detection
System Function
Throughput: 500 tests/ hr. with ISE and 400 tests/ hr. without ISE
Measuring Principle: Absorbance Photometry, Turbidimetry
Methodology:
- Endpoint, Fixed-Time, Kinetic
- Single/Dual/Triple/Quadruple Reagent Chemistries
- Monochromatic/ Bichromatic
Programming: User defined profiles and calculations
Sample Handling
Sample Tray: 90 positions for primary or secondary tubes and sample cups
Sample Volume: 1.5 µL, step by 0.1 µL
Sample Probe: liquid level detection, clot detection, horizontal and vertical collision protection
Probe Cleaning:
- Interior and exterior automatic probe washing carryover is < 0.05 %
- Automatic sample dilution, pre-dilution and post-dilution
- Dilution with ratio up to 1:150
Dilution Vessel: Permanent cuvette
Internal Bar Code Reader
Sample & Reagent Barcode Reading Includes:
- Codabar, ITF, Code 128, Code 39, UPC/EAN, Code 93
- Bi-directional LIS interface transmission
Reagent Handling
Reagent Tray: 80 positions
Reagent Volume:
- R1: 120-350 µL
- R2/R4: 10-35 µL
Reagent Probe:
- Liquid level detection
- Horizontal and vertical collision protection
- Inventory check
Probe Cleaning: Interior and exterior automatic probe washing
Reaction System
Reaction Rotor: Rotating tray, 90 cuvettes with automatic washing
Cuvette: Optical length 5 mm
Reaction Volume: 120-360 µL
Operating Temperature: 37 °C
Temperature Fluctuation: ± 0.1 °C
Mixing System: 2 independent mixers
Optical System
Light Source: Halogen-tungsten lamp
Photometer: Reversed, optics, grating photometry
Wavelengths (nm): 340, 380, 412, 450, 505, 546, 570, 605, 660, 700, 740, 800
Absorbance Range: 0-3.3 Abs
Resolutions: 0.0001 Abs
Control and Calibration
Calibration Mode:
- Linear (one-point, two-point and multipoint)
- Logit-log 4P, logit-log 5P, spline, exponential 5P
- Polynomial 5P, parabola, K-factor
Control Rules: Westgard Multi-Rule, Levy-Jennings, Cumulative Sum Check, Twin Plot
Operation Unit
Operating System: Windows 8, Windows 10
Interface: RS-232, network port, USB/ parallel port
Working Conditions
Power Supply: 200-240 V, 50/60 Hz, 1500 VA or 110-130 V, 60 Hz, 1500 VA
Temperature: 15-30 °C
Humidity: 35-85 %
Water Consumption: 20 L/ hr.
Dimensions (W x D x H in.): 46 x 28 x 45
Weight: 661 lbs.
Quartz Cuvettes for the BS-480 and BA-800M Analyzers
1 qty.
SKU #: 081-000016-00
Na Electrode for the BS-200 and BS-480 Analyzers
1 qty.
SKU #: 5201
K Electrode for the BS-200 and BS-480 Analyzers
1 qty.
SKU #: 5202
Cl Electrode for the BS-200 and BS-480 Analyzers
1 qty.
SKU #: 5207
Reference Electrode for the BS-200 and BS-480 Analyzers
1 qty.
SKU #: 5204
Space Electrode for the BS-200 and BS-480 Analyzers
1 qty.
SKU #: 5206
High Volume Reagent Module for the BS-480 Analyzer
1 qty.
SKU #: BA34-10-63673
ISE Cleaning Solution Kit for the BS-200 and BS-480 Analyzers
90 mL vol., 6 qty.
SKU #: 5421
Urine Diluent for the BS-200 and BS-480 Analyzers
125 mL vol., 1 qty.
SKU #: 5412
Sample Cups for the BS-200, BS-480 and BA-800M Analyzers
3 mL vol., 1000 qty.
SKU #: 110911
Tall Reagent Bottles with Caps for the BS-480 Analyzer
40 mL vol., 20 qty.
SKU #: MB560-20
Short Reagent Bottles with Caps for the BS-480 Analyzer
40 mL vol., 20 qty.
SKU #: MB561-20
Reagent Bottles with Caps for the BS-480 Analyzer
20 mL vol., 20 qty.
SKU #: MB562-20
Reagent Bottles with Caps for the BS-480 and BA-800M Analyzers
62 mL vol., 20 qty.
SKU #: MB563-20
Wash solution for the BS-480 and BA-800M Analyzers
2 L vol., 5 qty.
SKU #: BW910-DET
ISE Pump Tubing Kit
3 qty.
SKU #: 801-BA34-00105-00
Halogen Tungsten Lamp for the BS-480 and BA-800M Analyzers
1 qty.
SKU #: 081-000099-00
Uninterruptable Power Supply (UPS) for the BS-480 Analyzer
1 qty.
SKU #: 6-UPSBS-480
Reagent Probe Assembly for the BS-480 Analyzer
1 qty.
SKU #: 115-022013-00
Sample Probe Assembly for the BS-480 Analyzer
1 qty.
SKU #: 115-017854-00
